3.1 Network Configuration
3.1.1 Accessing Network Configuration#
Network settings are managed directly from the Guardpot appliance console. The installation menu, previously encountered during initial setup in Section 1.2, provides ongoing access to network configuration options. From the main console menu, select the appropriate option to modify network settings.
3.1.2 Modifying IP Address Settings#
To change the static IP address assigned during the Guardpot installation (see Section 1.2.3), navigate to the network configuration screen. Enter the new IP address, subnet mask, and default gateway as provided by your network administrator.
Important: Changing the IP address will temporarily disconnect any active sessions. After applying the new configuration, you must update any DNS records or hosts file entries that reference the previous address. Refer to Section 3.2 for DNS and hostname configuration.
3.1.3 Applying and Verifying Changes#
After modifying network parameters, the system will prompt for confirmation, similar to the process shown in Figure 1.2.4-1. Confirm the changes to apply the new network settings. To verify connectivity, perform a ping test from an external machine to the new IP address. If verification fails, re-check the IP address for conflicts and ensure the subnet and gateway settings are correct.
Was this article helpful?
Your feedback helps us improve the documentation.